top_products

MCH81

1台でバー材からワークの6面全加工を効率的に行えます。高速ダブルアーム方式ATC。
Six-face machining can be performed from bar material. High speed double arm ATC system.

MORE DETAIL

 

Slide Travel X,Y,Z-Axis
mm
Distance of Spindle Nose from Chuck
mm
Max. Spindle Speed
min-1
Max. Speed Rigid Tapping
min-1
Spindle Nose
kg
Spindle Motor
kW
7.5/5.5/3.7 Twin Power Motor
Rapid Traverse Rate X,Y,Z-Axis
m/min
Maximum size (Work)
mm φ80x120
3.15DIA x 4.72"
Supply bar material Maximum Size (Work)
mm φ80x1,000
3.15DIA x 39.4"
Cross index Unit
C-Axis Rotate angle
360°
B-Axis Turn angle
90°
Reversing index unit
U-Axis Slide Travel
mm
W-Axis Slide Travel
mm
A-Axis Rotate angle
360°
Shank of Tool Holders
BT30+P30T-II
Tool Change Time
Double arm system
No. of Tool Pot
30
Max. Tool Diameter x Tool Length
mm
Max. Tool weight (per 1 Tool)
kg/本
Tool Change Time Tool to Tool / Chip to Chip
sec 1.2/2.8
Size of Machine (Width, Depth, Height)
mm
Machine weight
kg
NC unit
FANUC 31i-B5
Power capacity required
KVA 18.2
Positioning accuracy/Repeated Positioning accuracy
mm 0.005 / +- 0.003
※本製品は、外国為替及び外国貿易法に基づく規制に該当する可能性があります。輸出先や用途により、同法に基づく許可が必要になります。
※改良のため、仕様及び特徴の一部をお断り無く変更することもございます。写真や内容が一部本機と異なる場合がありますのでご了承下さい。
Note: The specification are subject to change without notice. Machine in photo may not be exactly same as actual products.

MCH-80

1台でバー材からワークの6面全加工を効率的に行えます。高速ダブルアーム方式ATC。ワーク搬出用のピックアップユニットを標準装備。
Six-face machining can be performed from bar material. High speed double arm ATC system and pick-up unit for unloading is equipped as standard.

MORE DETAIL

Slide Travel X,Y,Z-Axis
mm
9.84"x17.7"x11.8"
Distance of Spindle Nose from Chuck
mm
3.94"~15.7"
Max. Spindle Speed
min-1
Max. Speed Rigid Tapping
min-1
Spindle Nose
kg
Spindle Motor
kW
5.5/3.7 Twin Power Motor
Rapid Traverse Rate X,Y,Z-Axis
m/min
1890, 1890, 1890IPM
Maximum size (Work)
mm φ80x120
3.15DIA x 4.72"
Supply bar material Maximum Size (Work)
mm φ80x1,000
3.15DIA x 39.4"
Cross index Unit
C-Axis Rotate angle
360°
B-Axis Turn angle
90°
Reversing index unit
U-Axis Slide Travel
mm
9.84"
W-Axis Slide Travel
mm
5.91"
A-Axis Rotate angle
360°
Shank of Tool Holders
BT30+P30T-II
Tool Change Time
Double arm system
No. of Tool Pot
30
Max. Tool Diameter x Tool Length
mm
2.56"dia x 7.78"
Max. Tool weight (per 1 Tool)
kg/本
5.5 Lbs(total 88 Lbs)
Tool Change Time Tool to Tool / Chip to Chip
sec 0.7/2.4
Size of Machine (Width, Depth, Height)
mm
105.7"x90.0"x78.7"
Machine weight
kg
7,920Lbs
NC unit
YS 840DI
Power capacity required
KVA 17.0
Positioning accuracy/Repeated Positioning accuracy
mm 0.005 / +- 0.003
※本製品は、外国為替及び外国貿易法に基づく規制に該当する可能性があります。輸出先や用途により、同法に基づく許可が必要になります。
※改良のため、仕様及び特徴の一部をお断り無く変更することもございます。写真や内容が一部本機と異なる場合がありますのでご了承下さい。
Note: The specification are subject to change without notice. Machine in photo may not be exactly same as actual products.

MCH-330

ワークの6面全加工を実現したマシニングセンタ
6 faces machining of workpiece in one machine.

MORE DETAIL





  • MCH-330 is a new model of MultiCell MCH-series that allows machining all faces of workpiece in one machine.
  • This model constitutes horizontal column travel BT30 spindle (Y/Z-axis), X1 and X2 tilting table, double-arm ATC unit with 30 tools and auto-loader.
  • Equipped standard loader and Mectron stocker or conveyor allows long un-manned operation.
  • During the operation the workpiece is transfered between 2 stages automaticaly to achive the minimum idle time.
  •  MACHINE SPECIFICATION

    Spindle Speed
    min-1
    Spindle Motor
    kw
    Rigit Tapping Speed
    min-1
    Spindle drive system
    Direct drive (Built-in)
    Slide Travel
    X1・X2-axis mm
    Y-axis mm
    Z-axis mm
    Table Rotation angle
    B1・B2-axis °
    C1・C2-axis °
    Rapid Traverse Rate
    X1・X2-axis m/mm
    Y-axis m/mm
    Z-axis m/mm
    Table turning speed
    B1・B2-axis min-1
    C1・C2-axis min-1
    Max work size
    mm
    Shank of Tool Holders
    Tool Change System
    Double arm system
    No. of Tool Pot
    tool
    Max. Tool Diameter × Tool Length
    mm
    Tool weight (total)
    kg
    Tool Change Time T. to t./C. to C.
    sec
    Size of Machine (Height)
    mm
    Size of Machine (Width, Depth)
    mm
    Machine weight
    kg
    NC unit
    Power capacity required
    3-phase
    Positioning accuracy/Repeated Positioning accuracy
    mm

     OPTION

    Spindle Airblow, Machine light, Signal Tower, Lubricating, Coolant unit, Center through coolant, mist collector, Chip conveyor, Tools, Set-up, Others

     NC unit Specification FANUC 0i-MD

    Standard function
    Controlled axes 4, Cylindrical interpolation, Helical interpolation, Canned cycle, Programabble data input, Custom macro B, Inch/metric conversion, Scaling, Workpiece coordinate system rotation, Work coordinate system, 48 sets of addition of the work coordinate system, External data input, Rigid tapping, Part program storage length 512Kbyte(1280m), Number of registerable programs 400, Extended part program editing, Tool offset pairs 400, Background editing, Run Hour and part count display, Absolute position detection X, Y, Z axis, Display unit 10.4" color LCD

    Option function
    AI contouring control I or II, Jerk, Tool management function 64, 240, 1000, First data server
    ※本製品は、外国為替及び外国貿易法に基づく規制に該当する可能性があります。輸出先や用途により、同法に基づく許可が必要になります。
    ※改良のため、仕様及び特徴の一部をお断り無く変更することもございます。写真や内容が一部本機と異なる場合がありますのでご了承下さい。
    Note: The specification are subject to change without notice. Machine in photo may not be exactly same as actual products.